Master Bond Polymer Adhesive EP31T is a non-dripping clear two component epoxy adhesive for general purpose bonding formulated to cure at room temperature or more rapidly at elevated temperatures, with a four (4) to one (1) mix rat o by weight. This adhesive is 100% reactive and does not contain any solvents or other volatiles, It is especially recommended where non-dripping is required for ease of application and bonded assemblies must exhibit superior dimensional stability. Shrinkage after cure is exceptionally low - 0.0003 inches/in.

Master Bond Polymer Adhesive EP31T produces high strength and tough bonds which are remarkably resistant to thermal cycling and chemicals including water, oil and mosl; organic solvents, over the exceptionally wide temperature range of -60°F to more than 250°F. Adhesion to both similar and dissimilar materials including metals, glass, ceramics, woocl, vulcanized rubbers and many plastics is excellent. The hardened adhesive is an electrical insulator. Color of part A is light amber, part B slightly yellow. Master Bond Polymer Adhesive EP31T is widely used in the electronic, electrical, computer, construction, metalworking, appliance, automotive and chemical industries.