Go to the MasterBond.com home page
Master Bond Polymer Adhesive Supreme10AOHT Product Description

 

MASTER BOND POLYMER ADHESIVE SUPREME10AOHT
One Component, Heat Curing Epoxy Adhesive Featuring Both High Shear And High
Peel Strength For Optimal Bonding Performance Up to 400°F As well As High Thermal Conductivity and Excellent Electrial Insulation Properties

Master Bond Polymer Adhesive SUPREME10AOHT represents a breakthrough in epoxy adhesive technology featuring a hitherto unattainable balance of performance properties including both high shear and high peel strengths. It also exhbits high thermal conductivity and excellent electrical insulation properties. This one component adhesive system is formulated to cure at elevated temperatures e.g. 1 hour at 250°-275°F, longer times at lower temperatures for maximum bond strengths. Tensile shear strengths of 30 pli are readily obtained. No mixing is necessary prior to use. Master Bond Polymer Adhesive SUPREME10AOHT produces truly exceptionally good bonds with both high shear and high peel strengths for service in the remarkably wide temperature range of below -300°F to over 400°F. It offers very superior resistance to impact, thermal shock, vibration and stress fatigue cracking while maintaining the moisture, creep, corrosion and thermal resistance typical of epoxy resin adhesives. It is 100% reactive and does not contain any diluents or solvents.

Master Bond Polymer Adhesive SUPREME10AOHT produces durable high strength, thermally conductive exceptionally, tough bonds which are remarkably resistant to severe thermal cycling and many chemicals, including water, oil, fuels and most organic solvents, even upon prolonged exposures. Unlike many other epoxy adhesives, its performance is relatively insensitive to changes in cure schedules or substrate cleaning procedures. Adhesion to metals, glass, ceramics, wood, vulcanized rubbers and many plastics is excellent. The hardened adhesive is a superior thermal conductor. Color is gray. Master Bond Polymer Adhesive SUPREME10AOHT offers the convenience of a heat cure with no mixing prior to use and a uniquely favorable bonding performance for even the most difficult applications in the aerospace, electronic, electrical, computer, metalworking, appliance, automotive and chemical industries.

The cured adhesive fully meets the requirements of MIL-A-47280(MI) Type I and other specificiations.

Click here to request additional information on this product




Contact Us Overview Products
by Type
Products
by Use
Packaging
Solutions
Ordering
& Sales
News Technical
Reference
Site
Map
Legal Notices & Credits © Copyright 1999-2009 Master Bond Inc., All Rights Reserved