|
Super Gel 9: Urethane Modified Epoxy Gel System |
|
|
Super Gel 9 cures readily at room temperature to form a soft, resilient, gel-like system with superb dimensional stability. This optically clear system has an exceptionally low hardness of about 5-10 Shore A. It can be cast in sections up to 2-3 inches thick due to its thin viscosity and low exotherm. Super Gel 9 combines easy handling and curing properties, making it ideal for potting/encapsulation sensitive electronic parts and delicate optical components.
For more information, request a technical data sheet on Super Gel 9
|
|
|
UV15-7SP4: Optically Clear, Flexible UV Curable Compound |
|
|
One part, fast curing UV15-7SP4 has remarkable non-yellowing properties. Most importantly, it withstands rigorous thermal cycling as well as mechanical vibration and impact. Dimensionally stable, it bonds well to a wide variety of substrates including glass, metals and plastics, such as polycarbonates, acrylics and a number of films, with very little shrinkage upon curing. Additionally, UV15-7SP4 offers superb chemical resistance to water, fuels, acids and bases.
For more information, request a data sheet on UV15-7SP4
|
|
EP65HT-1: Fast Setting & Withstands Chemicals |
|
|
EP65HT-1 offers the unique combination of rapid cures at room temperature and high thermal stability. This two component epoxy sets up in just 3-5 minutes at 75°F and can withstand temperatures up to 400°F. It has a remarkable glass transition temperature of about 125°C. It also meets NASA low outgassing requirements. Available for use in a convenient application gun, this compound features both superior dimensional stability and high tensile strength properties.
For more information, request a data sheet on EP65HT-1
|
|
|
EP41S-F: Versatile, Fast Curing Two Component Epoxy |
|
|
Offering impressive physical strength characteristics, EP41S-F is an electrically insulative two component epoxy that cures rapidly at ambient and elevated temperatures. Typically faster curing epoxies are somewhat less chemically resistant than other types of systems, but EP41S-F is one of the few exceptions in that regard. It withstands many groups of chemicals quite well, especially oils, fuels, water and hydraulics.
For more information, request a data sheet on EP41S-F
|
|
|
Supreme 42HT-2: Thermal Cycling Resistant Adhesive System |
|
|
Featuring exceptional toughness, Supreme 42HT-2 is a two part epoxy system with excellent heat and chemical resistance. It has impressive thermal cycling capabilities and is ideal for bonding dissimilar substrates. It is also frequently employed in potting/encapsulation applications. Supreme 42HT-2 is serviceable from -80°F to +425°F and offers superb electrical insulation properties. It is used in many industries including aerospace, electronic, chemical processing, automotive and renewable energy.
For more information, request a data sheet on Supreme 42HT-2
|
|
|
EP21TDCSMed: Electrically Conductive Epoxy Meets USP Class VI Requirements |
|
|
EP21TDCSMed is a two component, room temperature curing epoxy adhesive featuring exceptionally low volume resistivity. This silver filled compound has a convenient non-critical one to one mix ratio by weight or volume, and can be applied on vertical surfaces with minimal sagging. It is resistant to thermal cycling and has exceptional bond strength to both similar and dissimilar substrates. EP21TDCSMed is USP Class VI approved and is widely used in medical electronic applications that require biocompatibility.
For more information, request a data sheet on EP21TDCSMed
|
|
 newsletters@masterbond.com
 +1 201 343 8983
Copyright  2016 by Master Bond Inc. All Rights Reserved. This content may not be reproduced in any way without the prior written permission of Master Bond Inc.
|
|
|
|
View this email online
January 2016
