|
MB600S: One Part, Silver Conductive System Offers Excellent Shielding Effectiveness |
MB600S is an aqueous based sodium silicate coating formulated for applications where electromagnetic interference/radio frequency interference (EMI/RFI) shielding is required. Tested according to IEEE 299, 2006 methods, MB600S was as effective as the aluminum reference with a shielding effectiveness of 95-105 dB, from 1-2 GHz. It is easy to brush on and being water based, the system is relatively non-toxic. It also is temperature resistant up to +700°F.
For more information, request a technical data sheet on MB600S
|
|
MB600SCN: High Temperature Resistant, Sodium Silicate System |
Featuring a silver coated nickel filler, MB600SCN is an aqueous based, sodium silicate system for use in applications where very good shielding effectiveness is required and cost considerations might be more pronounced. Conductive coatings are often applied to housings in order to protect electronic devices from EMI and RFI. MB600SCN forms strong, rigid bonds and is temperature resistant up to 700°F. It is also highly effective as a moisture barrier.
For more information, request a technical data sheet on MB600SCN
|
| X5SC: One Part Silver Filled Elastomeric System |
X5SC is a solvent based elastomeric system with superb electrical conductivity. This allows it to be utilized not only as an adhesive, but also as a highly effective system for shielding. It has a paste-like consistency and is very easy to use. This system is well suited for bonding dissimilar substrates and performs well when subjected to thermal cycling, vibration, shock and related forces.
For more information, request a technical data sheet on X5SC
|
| MasterSil 155: Tough, Flexible Electrical Conductive Silicone |
MasterSil 155 is a graphite filled, two component silicone with a smooth paste consistency which assures complete fill-in around contours in a variety of bonding and sealing applications. It is widely used in electronic components, electrical devices and various electro-optical systems as well as for special electronic circuitry. This product cures to a black rubber and offers superior protection against vibration, impact and shock. It is well suited for dissipating static electricity and for EMI/RFI shielding.
For more information, request a technical data sheet on MasterSil 155
|
| EP75-1: Non-Magnetic Graphite Filled Epoxy |
Room temperature curing EP75-1 offers high lubricity and uniquely non-magnetic properties. It can be applied with minimal sagging even on vertical surfaces. EP75-1 resists harsh chemicals, bonds to dissimilar substrates and performs well from -60°F to +250°F. Its volume resistivity is 50-100 ohm-cm. This compound is widely employed in the electronic, electrical, computer, semiconductor, microwave, appliance, automotive industries, as well as for EMI/RFI shielding and static dissipation.
For more information, request a technical data sheet on EP75-1
|
|
|
|
Copyright  2016 by Master Bond Inc. All Rights Reserved. This content may not be reproduced in any way without the prior written permission of Master Bond Inc.
|
|
View this email online
March 2016
