This email was sent to (%email%) Unsubscribe at: http://www.masterbond.com/phplist/?p=unsubscribe&id=2 Subscribe at: http://www.masterbond.com/phplist/?p=subscribe&id=2 ---------------------------------- The following is a news release from Master Bond Inc. You have received it because you are listed as an editor for your publication. Attached to this email is a low resolution version of the photograph that is included in the press kit for this product. High resolution versions of this image and files with the body text of this release are available at http://www.masterbond.com/mbnr.html?nr=uv10med. ---------------------------------- FOR IMMEDIATE RELEASE NEW USP Class VI Approved Adhesive is Optically Clear HACKENSACK, NJ - May 29, 2008 -- A new one component, low viscosity, optically clear, UV curable adhesive called UV10MED has been developed by Master Bond Inc., Hackensack, N.J. This compound is USP Class VI approved and is recommended for use in medical device manufacturing. It offers superior adhesion to metals, glass, ceramics and most plastics. It also has excellent chemical resistance properties and is resistant to many types of sterilants. It has a service operating temperature range of -60°F to 250°F. Master Bond UV10MED is easy to use. Its low viscosity makes it advantageous in applications where there is a small clearance between surfaces being bonded. It is 100% reactive and does not contain any solvents or other volatiles. Particularly noteworthy is its rapid cure speed upon exposure to a UV lamp. Typical cure times range from 5-10 seconds to 2-3 minutes at ambient temperatures. A 200 watt/inch medium pressure mercury vapor lamp or equivilant UV light source is recommended. Master Bond UV10MED has a tensile strength of >4000 psi. It has a Shore D hardness of >60 and an elongation of <5%. It has outstanding electrical insulation properties. UV10MED has a storage stability of 3 months in original unopened containers at 70°F. It can be purchased for use in ½ pint, pint, quart, gallon and 5 gallon containers. It can also be obtained in syringe applicators. CONTACT: James Brenner, Marketing Manager Email: jbrenner@masterbond.com Tel: 201-343-8983 Fax: 201-343-2132 MASTER BOND INC. 154 Hobart Street Hackensack, NJ 07601-3922 Web: www.masterbond.com # # #