 |
Master Bond EP21TP-2 features superior thermal shock and chemical resistance while maintaining durable bonds to similar and dissimilar substrates. This tough epoxy polysulfide compound is noted for its ability to withstand prolonged exposure to fuel and oils. EP21TP-2 cures at ambient temperatures or more rapidly at elevated temperatures and can be applied without sagging.
|
|
Room Temperature Curing Epoxy Has Exceptional Chemical Resistance |
EP41S-1HT is a two component epoxy system with outstanding resistance to a variety of chemicals including gasoline, gasohol, fuels, oils, alcohols, skydrol, ethyl acetate, toluene, as well as a wide number of other organic and inorganic solvents. In addition to its ability to withstand chemical immersions, this moderate viscosity system has excellent mechanical properties including high tensile and compressive strengths. Serviceability is from -60°F to +400°F.
For more information, request a technical data sheet on EP41S-1HT
|
| UV Curable System with Outstanding Optical Clarity |
Widely used in optical, fiber-optic and electronic applications, UV18S features excellent optical clarity and light transmission properties. This chemical resistant, toughened, high performance one part system has a tensile strength exceeding 5,000 psi at room temperature. It cures readily in 20-30 seconds when exposed to a UV light source emitting at a wavelength of 320-365 nm. Electrical insulation properties are superior.
For more information, request a technical data sheet on UV18S
|
| Dimensionally Stable Epoxy Has Quartz Filler |
EP30QF is a quartz filled, two component epoxy for high performance bonding, sealing, coating and casting applications that meets NASA low outgassing specifications. It is formulated to produce high strength, rigid bonds which are remarkably resistant to chemicals including water, oil and most organic solvents. EP30QF’s linear shrinkage after cure is exceptionally low. It is especially recommended where high tensile modulus, outstanding compressive strength and superior dimensional stability are required.
For more information, request a technical data sheet on EP30QF
|
| Epoxy Offers Superior Acid Resistance |
EP21ARHT combines high temperature resistance with an impressive ability to withstand exposure to a variety of acids and other chemicals. It is especially noteworthy for its resistance to sulfuric and hydrochloric acids. This two part, 100% reactive epoxy is especially useful for coating tanks, pipes, scrubbers and other types of chemical processing equipment. It is serviceable over the wide temperature range of -60°F to +400°F. It also features a low thermal expansion coefficient and minimal linear shrinkage upon cure.
For more information, request a technical data sheet on EP21ARHT
|
| One Part Fluorosilicone Paste Resists High Temperatures |
MasterSil 930 is an acetoxy type fluorosilicone for bonding, sealing and coating. Its most prominent feature is excellent chemical resistance, particularly to fuels, oils and solvents when compared to more standard silicones. Featuring a hardness of 30-40 Shore A, MasterSil 930 is a flexible system and resists rigorous thermal cycling as well as mechanical and thermal shock. It is electrically insulative and has a volume resistivity of over 1014 ohm-cm. Its service temperature range is -85°F to +450°F.
For more information, request a technical data sheet on MasterSil 930
|
|
|
|
Copyright  2015 by Master Bond Inc. All Rights Reserved. This content may not be reproduced in any way without the prior written permission of Master Bond Inc.
|
|
View this email online
April 2016
