|
EP42HT-2FG: Food Grade, Heat Resistant Epoxy
|
This compound was independently tested and certified to meet the specifications of FDA CFR 175.300. EP42HT-2FG also complies with the toxicological requirements NSF/ANSI 51(2009) Standard for Food Equipment Materials as defined in section 4.1. It has wide applicability in the food industry. As an adhesive and sealant, it is well suited for bonding metals, plastics, rubbers and other substrates common to the manufacture of food service equipment. It also resists exposure to boiling water, radiation, chemicals, steam and frozen storage conditions.
For more information, request a technical data sheet on EP42HT-2FG
|
|
EP62-1Med: Medical Adhesive Holds Up to Repeated Sterilization |
Serviceable over the wide temperature range of -60°F to +400°F, EP62-1Med is a two component epoxy adhesive, sealant and encapsulant that meets USP Class VI specifications. It has a long working life at room temperature and cures rapidly at 200-250°F. This compound is designed to withstand repeated cycles of steam, EtO, radiation and chemical sterilants. EP62-1Med has superior electrical insulation properties and exceptionally low shrinkage upon cure.
For more information, request a technical data sheet on EP62-1Med
|
|
UV24TKLO: NASA Low Outgassing Approved
|
UV24TKLO is a one part UV curable epoxy modified formulation for bonding, sealing and encapsulation. This compound has excellent optical clarity, superb physical strength, superior electrical insulation properties and outstanding chemical resistance. Its low outgassing properties enable this product to be used in a wide array of optical, electro-optical and vacuum applications that until now have not been possible for UV curable systems.
For more information, request a technical data sheet on UV24TKLO
|
|
UV15: Exceptionally High Glass Transition Temperature |
Cationic systems, such as UV15, tend to have much higher temperature resistance than other UV type systems. Its glass transition temperature (Tg) with a straight UV cure is 90-95°C, and when post cured for 30 minutes at 125°C, the Tg is 125-130°C. This post cure also enhances UV15’s chemical resistance. This system is 100% reactive, is halogen free and meets IEC 61249-2-21 standards.
For more information, request a technical data sheet on UV15
|
|
MasterSil 709: One Part Silicone Meets MIL-A-46146 Specification |
Easy to use, one component MasterSil 709 is well suited for bonding, sealing, coating and formed in place gaskets applications. It is non-corrosive, fast setting, translucent and flowable. It can be widely used for many applications, particularly in aerospace and electronics.
For more information, request a technical data sheet on MasterSil 709
|
|
EP21FRNS-2: Flame Retardant Epoxy System |
Featuring a non-halogenated filler, EP21FRNS-2 is a two component, room temperature curing epoxy offering low smoke generation for potting, encapsulating and casting applications. As per the UL 94V-0 specification, this system is serviceable over the wide temperature range of -60°F to 200°F. It is remarkably resistant to thermal cycling and many chemicals. EP21FRNS-2 is exceptionally durable/tough and features a convenient one to one mix ratio by weight.
For more information, request a technical data sheet on EP21FRNS-2
|
|
|
|
Copyright  2014 by Master Bond Inc. All Rights Reserved. This content may not be reproduced in any way without the prior written permission of Master Bond Inc.
|
|
View this email online
September 2014
