| EP121AO: NASA Low Outgassing System Features Outstanding Dimensional Stability |
EP121AO is a two component, high performance epoxy resin system ideal for coating, sealing, potting and encapsulation for service up to 450-500°F. It also features impressive thermal conductivity and superior electrical insulation properties. EP121AO cures readily at elevated temperatures to a tough, strong solid with excellent long-term durability and chemical resistance even when exposed to adverse environmental conditions. This compound has a long working life at room temperature.
For more information, request a technical data sheet on EP121AO
|
| EP62-1Med: Medical Adhesive Holds Up to Repeated Sterilization |
Serviceable over the wide temperature range of -60°F to +450°F, EP62-1Med is a two component epoxy adhesive, sealant and encapsulant that meets USP Class VI specifications. It has a long working life at room temperature and cures rapidly at 200-250°F. This compound is designed to withstand repeated cycles of steam, EtO, radiation and chemical sterilants. EP62-1Med has superior electrical insulation properties and exceptionally low shrinkage upon cure.
For more information, request a technical data sheet on EP62-1Med
|
| UV24TKLO: NASA Low Outgassing Approved |
UV24TKLO is a one part UV curable epoxy modified formulation for bonding, sealing and encapsulation. This fast curing compound has excellent optical clarity, superb physical strength, superior electrical insulation properties and outstanding chemical resistance. Its low outgassing properties enable this product to be used in a wide array of optical, electro-optical and vacuum applications that until now have not been possible for UV curable systems.
For more information, request a technical data sheet on UV24TKLO
|
| EP30HT: High Temperature Resistant Epoxy Offers Optical Clarity |
Featuring high light transmission properties, EP30HT resists temperatures up to 400°F. It exhibits impressive physical strength and excellent adhesion to both similar and dissimilar substrates. EP30HT has exceptionally low shrinkage after cure and forms bonds that are rigid and resistant to chemicals. This compound has a four to one mix ratio by weight and is available in convenient syringe and gun applicators.
For more information, request a technical data sheet on EP30HT
|
| MasterSil 710: Complies with MIL-A-46146A Type 1 |
Well suited for the aerospace, defense and electronic industries, MasterSil 710 is a one part silicone system for bonding, sealing, coating and formed in place gasket applications. This non-corrosive, fast setting system has a paste consistency and cures readily at room temperature depending on the thickness of the layer and the humidity. It is translucent and is serviceable over the wide temperature range of -75°F to +400°F.
For more information, request a technical data sheet on MasterSil 710
|
| EP21FRNS-2: Flame Retardant Epoxy System for Industrial Applications |
Featuring a non-halogenated filler, EP21FRNS-2 is a two component, room temperature curing epoxy offering low smoke generation for potting, encapsulating and casting applications. As per the UL 94V-0 specification, this system is serviceable over the wide temperature range of -60°F to 200°F. It is remarkably resistant to thermal cycling and many chemicals. EP21FRNS-2 is exceptionally durable and tough. It also features a convenient one to one mix ratio by weight.
For more information, request a technical data sheet on EP21FRNS-2
|
|
|
|
Copyright  2016 by Master Bond Inc. All Rights Reserved. This content may not be reproduced in any way without the prior written permission of Master Bond Inc.
|
|
View this email online
May 2016
