View this email online
Logo
September 2015
New White Paper: Conductive Coatings Protect Circuitry from EMI/RFI and ESD
image
With the trend toward smaller electronic devices, unintentional EMI/RFI interference has become more of an issue. Shielding of these interferences is critical and coatings can be successfully applied as protection on the materials used. In this paper, the different sources of interference are explored, as well as how coatings can play a critical role in protecting these sensitive components and boards.

Read More
No Mix, Electrically Conductive, High Temperature Resistant Coating System
image
Ideal for electromagnetic interference and radio frequency interference shielding applications, MB600G is an aqueous based, sodium silicate system with a graphite filler. Graphite filled materials are widely used for shielding and static dissipation applications because of their balance of shielding effectiveness and cost. MB600G is serviceable over the remarkably wide temperature range of 0°F to +700°F.

For more information, request a technical data sheet on MB600G
Silver Coated Nickel Conductive Epoxy
image
Master Bond’s epoxy cost effective EP79 forms high strength bonds even at extreme temperatures. Often used in cryogenic applications, EP79 is serviceable from 4K to +275°F. It is electrically conductive (volume resistivity less than 0.005 ohm-cm) and has minimal sagging while offering thermal cycling resistance. This strong and tough system features exceptional chemical resistance properties and is widely used in the electronic, electric, computer, semiconductor, microwave, appliance and automotive industries.

For more information, request a technical data sheet on EP79
Compound Offers Outstanding Dimensional Stability
image
EP76M is a nickel filled polymer system, featuring excellent electrical conductivity and high strength bonds. This room temperature curing system can be applied on vertical surfaces without sagging. Its adhesion to a wide variety of substrates is excellent. EP76M retains its chemical resistance from -60°F to +250°F. It is used extensively in the electronic, electrical, computer, semiconductor, microwave, appliance and automotive industries for bonding, sealing and coating.

For more information, request a technical data sheet on EP76M
Addition Cured System Has High Flexibility and Low Volume Resistivity
image
MasterSil 973S-LO is a two component, silver filled silicone with superb electrical and thermal conductivity. Its exceptionally low volume resistivity allows it to be used for many different applications involving bonding, sealing and coating. It is a paste like system with minimal flow. Its consistency allows it to be utilized as a form-in-place conductive gasketing material. Service operating temperature is -120°F to +400°F. This vacuum compatible compound cures in deep and wide sections.

For more information, request a technical data sheet on MasterSil 973S-LO
Rapid Curing, Silver Filled Epoxy Compound
image
Well suited for demanding manufacturing applications, EP3HTS is a one part, electrically conductive epoxy system featuring low volume resistivity of less than 0.001 ohm-cm. Cures can be obtained in 40-90 minutes at 250°F or 20-40 minutes at 300°F. Tensile shear strengths over 1,000 psi are achieved using these fast cure times. This system has a service temperature range of -60°F to +400°F. EP3HTS has a smooth paste consistency and is easy to dispense.

For more information, request a technical data sheet on EP3HTS

Master Bond

Website:www.masterbond.com
Email:newsletters@masterbond.com
Phone:+1 201 343 8983
Facebook   Twitter   Google Plus   Linkedin
Copyright © 2015 by Master Bond Inc. All Rights Reserved. This content may not be reproduced in any way without the prior written permission of Master Bond Inc.