|
How To Use a Gun Dispenser
|
|
In this informative video, a Master Bond representative demonstrates how simple it is to use a gun dispenser when applying two component epoxies. Our gun applicators ensure that accurate quantities of Parts A and B are efficiently dispensed relieving the uncertainty of complicated mix ratios. Watch now
|
 |
|
Top Products Available For Use In Gun Applicators
|
|
EP42HT-2
|
|
With remarkable heat resistance to 450°F, EP42HT-2 is a room temperature curable, two component epoxy adhesive, sealant, coating and casting material. It is resistant to a wide variety of acids, bases, solvents, fuels, oils and salts. This system has superior optical transmission properties, particularly in thinner sections, as well as a high index of refraction for an epoxy.
Request a data sheet on EP42HT-2
|
|
|
EP30HT-LO
|
|
Ideal for a wide variety of applications, EP30HT-LO passes NASA low outgassing testing per ASTM E595 specifications. This two component system combines high temperature resistance up to 400°F with excellent optical clarity. EP30HT-LO cures rigid at room temperature with exceptional dimensional stability and superb physical strength properties.
Request a data sheet on EP30HT-LO
|
|
 |
|
EP21TDC-4ND
|
|
Featuring a non-drip consistency, Master Bond EP21TDC-4ND is an easy to handle, two component epoxy with a one to four mix ratio by weight. This high strength system delivers outstanding adhesion to rubbers as wells as a variety of other substrates. It also offers excellent resistance to thermal cycling, vibration and mechanical shocks.
Request a data sheet on EP21TDC-4ND
|
|
|
EP21TDCF-3
|
|
EP21TDCF-3 produces bonds and seals with high tensile strength and peel strength exceeding 1,700 psi and 35 pli respectively. This two part adhesive offers superior resistance to thermal cycling and is serviceable over the temperature range of -100°F to +250°F. EP21TDCF-3 features a one to one mix ratio by weight or volume.
Request a data sheet on EP21TDCF-3
|
|
|
|
EP21LV
|
|
EP21LV is a low viscosity epoxy for high performance bonding, sealing, coating, encapsulation and casting. This two part system produces high strength, durable bonds which hold up well to thermal cycling and resist many chemicals. EP21LV also meets FDA Chapter 1, Section 175.105 requirements for indirect food contact.
Request a data sheet on EP21LV
|
|
|
EP65HT-1
|
|
This two component epoxy offers the unique combination of ultra fast cures and exceptionally high temperature resistance. EP65HT-1 sets up in just 3-5 minutes at 75°F and can withstand temperatures up to 400°F. It has a remarkable glass transition temperature of about 125°C. It also meets NASA low outgassing requirements.
Request a data sheet on EP65HT-1
|
|
 |
 |
154 Hobart Street, Hackensack, New Jersey, USA
|
|
|
|
|
|
|
|
|
Copyright © 2014 by Master Bond Inc. All Rights Reserved. This content may not be reproduced in any way without the prior written permission of Master Bond Inc.
|
|
January
Forward
Website
