|
New White Paper: Silicones Meet the Needs of the Electronics Industry |
Silicones offer the ability to maintain their physical properties across a wide range of temperature conditions along with unmatched flexibility. In this white paper, learn what makes silicones different from other organic polymers, and how they are playing a major role in the rapid innovation of the electronics industry.
|
|
Thermally Conductive Silicone Passes UL 94V-0 Testing for Flame Retardancy
|
Featuring superb electrical insulation properties, MasterSil 156 is a two component, low viscosity silicone system for high performance potting, encapsulation and sealing. It combines high temperature resistance, flexibility, low shrinkage upon cure and thermal conductivity exceeding 8-9 BTU•in/ft²•hr•°F.
For more information, request a technical data sheet on MasterSil 156 |
|
Flexible, Heat Dissipative Silicone Withstands 400°F |
MasterSil 151AO is a two component, low viscosity silicone compound for high performance potting and encapsulation. It combines high temperature resistance, superior flexibility, outstanding thermal conductivity and thermal cycling resistance. This addition cured silicone system cures readily at room temperature and does not require air for complete cross-linking.
For more information, request a technical data sheet on MasterSil 151AO |
|
One Part Silicone Cures in a Flash at Room Temperature |
Ideal for smaller encapsulations and conformal coating applications, MasterSil 713 is an easy to use one component silicone with an exceptionally low viscosity. This self leveling system is a fast curing silicone at room temperature. Speed of cure depends upon the level of humidity and the thickness of the layer being cured It can be cured in thicknesses up to ¼ inch deep with superb flexibility and elasticity.
For more information, request a technical data sheet on MasterSil 713 |
|
Low Viscosity Conformal Coating Cures Quickly at Room Temperature |
Easy to use, solvent-free MasterSil 773 is a one component exceptionally low viscosity, silicone elastomer based conformal coating. It provides excellent protection to electronic circuitry in high humidity environments as well as upon exposure to shock and vibration.
For more information, request a technical data sheet on MasterSil 773 |
|
One Part, Silver Filled Silicone Adhesive/Sealant
|
Electrically conductive, MasterSil 705S is a single component silicone that cures at room temperature for bonding, sealing and EMI/RFI shielding applications. This easy to use compound is non-corrosive and has a very low volume resistivity of less than 0.01 ohm-cm. It has especially good adhesion to other silicones permitting wide applicability for use with most gasketing materials.
For more information, request a technical data sheet on MasterSil 705S |
|
Condensation Curing Silicone Is Optically Clear |
Low viscosity MasterSil 152 is a two component silicone system that cures when exposed to air at room temperature. It has an exceptionally low viscosity and outstanding electrical insulation properties, making it ideal for potting and encapsulation applications. Additionally it features a long pot life and has a low exotherm.
For more information, request a technical data sheet on MasterSil 152 |
|
|
Copyright 2014 by Master Bond Inc. All Rights Reserved. This content may not be reproduced in any way without the prior written permission of Master Bond Inc.
|
|