 |
Master Bond’s EP3 series features outstanding performance properties, long-term durability and easy application. These one part epoxies do not require mixing, eliminate waste and have an unlimited working life at room temperature. They are formulated to cure quickly at elevated temperatures and are also designed to increase productivity. These EP3 products are 100% reactive and do not contain any diluents or solvents.
|
|
EP3HT: Rapid Curing High Strength Epoxy |
Offering high temperature resistance up to +400°F [+204°C], EP3HT is an adhesive/sealant that withstands thermal cycling and many harsh chemicals. After curing, it readily obtains a tensile lap shear strength in excess of 2,200 psi and delivers first rate dimensional stability. It also has been successfully tested for 1,000 hours at 85°C/85 RH.
For more information, request a technical data sheet on EP3HT
|
|
EP3SP5FL: One Component Snap Cure Epoxy Adhesive
|
Featuring an extraordinary combination of properties, EP3SP5FL offers snap cures of 1-2 minutes at 300°F. It has high strength properties, superior electrically insulation and is readily reworkable. With a flowable, moderate viscosity, EP3SP5FL adheres well to a variety of substrates including metals, composites, glass, ceramics, many rubbers and plastics. It has a service temperature range of -60°F to +200°F [-51°C to +93°C]. Additionally, it can withstand exposure to thermal cycling.
For more information, request a technical data sheet on EP3SP5FL
|
|
EP3HTS: Silver Filled, Fast Curing Epoxy |
Well suited for demanding manufacturing applications, EP3HTS is an electrically conductive epoxy system featuring low volume resistivity of <0.001 ohm-cm. Cures can be obtained in 40-90 minutes at 250°F or 20-40 minutes at 300°F. This system is serviceable over the wide temperature range of -60°F to +400°F [-51°C to +204°C] .Tensile shear strengths over 1,000 psi are achieved using these fast cure times. EP3HTS has a smooth paste consistency and is easy to dispense.
For more information, request a technical data sheet on EP3HTS
|
|
EP3HTMed: Chemically Resistant Adhesive Meets USP Class VI Specifications |
Master Bond EP3HTMed fully meets USP Class VI requirements and has a service operating temperature of -60°F to +400°F [-51°C to +204°C]. It has a thixotropic paste viscosity and features excellent resistance to radiation, EtO, autoclaving and chemical sterilants.
For more information, request a technical data sheet on EP3HTMed
|
|
|
|
Copyright  2017 by Master Bond Inc. All Rights Reserved. This content may not be reproduced in any way without the prior written permission of Master Bond Inc.
|
|
View this email online
May 2017
