|
New Catalog: Adhesives, Sealants & Coatings for the Optical Industry |
This 24 page catalog features performance properties on Master Bond’s extensive line of epoxy, silicone and light curing compounds that meet the specific demands of the optical, fiber-optic, electro-optic, display, photonic and biophotonic industries. These products are used for bonding, laminating, sealing, coating, precise positioning, fixturing, mounting and potting/encapsulation.
|
|
EP30-2LB: Blocks UV Light & Allows Visible Light to Transmit |
Formulated to have special optical transmission properties, EP30-2LB is an optically clear epoxy that does not permit UV light transmission, but transmits well from 450-900 nm and above. It is a user friendly compound that has a non-critical ten to one mix ratio by weight. This system cures readily in 24-48 hours at room temperature or more rapidly at elevated temperatures. EP30-2LB is highly resistant to water, oils, fuels, acids, bases and many solvents. This highly dimensionally stable product has low shrinkage upon curing and meets NASA low outgassing specifications.
For more information, request a technical data sheet on EP30-2LB |
|
EP112LS: Ideal for Potting/Impregnation Applications |
EP112LS is optically clear, features reliable non-yellowing properties and has a refractive index of 1.55. This electrically insulative system is resistant to chemicals including water, oils, fuels, acids and bases. Featuring a low mixed viscosity of 50-200 cps, this system bonds well to a wide variety of substrates, including metals, composites, glass, ceramics and many rubbers and plastics. EP112LS is serviceable over the temperature range of -60°F to +450°F. It is highly effective in sealing porosity in porous surfaces and preventing fluid/gas leakage.
For more information, request a technical data sheet on EP112LS |
|
|
Copyright 2017 by Master Bond Inc. All Rights Reserved. This content may not be reproduced in any way without the prior written permission of Master Bond Inc.
|
|