EP41SMed: Low Viscosity, Medical Grade Epoxy Compound |
|
USP Class VI approved, EP41SMed is well suited for a variety of uses in disposable/reusable medical devices as an adhesive, sealant and coating. This epoxy system is very fast curing at room temperature and produces high strength rigid bonds, which are remarkably resistant to chemicals as well as cold sterilants, EtO and gamma radiation. It has a wide service temperature range of -60°F to + 250°F and exceptionally low linear shrinkage upon cure.
For more information, request a data sheet on EP41SMed
|
|
EP37-3FLFAO: Resists Rigorous Vibration, Impact and Thermal Cycling |
|
Cryogenically serviceable down to 4K, EP37-3FLFAO is well suited for demanding potting, bonding, sealing and coating applications. It has an unusual blend of properties including impressive thermal conductivity, excellent electrical insulation, good physical strength and a high degree of flexibility. This two component epoxy has also been certified by NASA as a low outgassing system.
For more information, request a data sheet on EP37-3FLFAO
|
|
MasterSil 800: Silicone System Is Serviceable Up To 300°C |
|
Featuring unsurpassed thermal stability, MasterSil 800 is serviceable at temperatures as high as 300°C. This one part, high performance, non-corrosive silicone is low in viscosity making it free flowing and self leveling. It is ideal for bonding, sealing, protective coatings, encapsulating and creating formed-in-place gaskets.
For more information, request a data sheet on MasterSil 800
|
|
EP21HT: Epoxy Meets F.D.A. Requirements for Food Compatibility |
|
Master Bond has developed EP21HT, a high performance, two component epoxy adhesive/sealant for service up to 400°F. EP21HT cures at room temperatures, has a convenient one to one mix ratio and is easy to apply. It offers superior bond strength to similar and dissimilar substrates. EP21HT is durable and resists exposure to many chemicals. It also meets FDA 175.105 requirements for indirect food applications.
For more information, request a data sheet on EP21HT
|
|
Supreme 3HTND-1SM: One Part Epoxy for Surface Mount Applications |
|
Supreme 3HTND-1SM is a rapid curing, no-mix, thixotropic, surface mount adhesive for high performance bonding applications. It features exceptional toughness, durability, no stringing and a consistent dot profile. Additionally, this epoxy has excellent electrical insulation properties, good thermal conductivity and an enhanced ability to withstand thermal cycling and mechanical shocks.
For more information, request a data sheet on Supreme 3HTND-1SM
|
|
newsletters@masterbond.com
+1 201 343 8983
Copyright 2015 by Master Bond Inc. All Rights Reserved. This content may not be reproduced in any way without the prior written permission of Master Bond Inc.
|
|
|
|