|
X5TC: One Part, Thermally Conductive Elastomeric System |
|
|
Elastomeric adhesive system, X5TC delivers thermal conductivity of 10-12 BTU•in/ft2•hr•°F [1.44-1.73 W/m•K] while maintaining excellent electrical insulation properties. It is well suited for bonding dissimilar substrates and performs well when subjected to thermal cycling, vibration, shock and related forces. This system offers solid tensile lap shear and T-peel strength. X5TC has a paste-like consistency
and cures at room temperature or more quickly with the addition of heat.
For more information, request a technical data sheet on X5TC
|
|
EP76MHT: Nickel Filled Epoxy Withstands Temperatures up to +400°F |
|
|
Two component EP76MHT is an adhesive, sealant and coating that features impressive electrical conductivity with a volume resistivity of 5-10 ohm-cm. This easy to handle system is formulated to cure at room temperature or more rapidly at elevated temperatures. When fully cured, EP76MHT, has a lap shear
strength of over 2,100 psi. It has superior dimensional stability and low shrinkage upon cure. This epoxy also offers excellent thermal conductivity of 8-9 BTU•in/ft2•hr•°F [1.15-1.30 W/m•K].
For more information, request a data sheet on EP76MHT
|
|
|
EP21TPLV: Compound with Excellent Resistance to Chemicals |
|
|
Featuring a unique blend of outstanding toughness and chemical resistance, EP21TPLV can withstand exposure to water, gasoline, oils, hydrocarbons, fuels, hydraulic fluids and many acids and bases. Often used as a sealant, it is also very effective as an adhesive, coating and encapsulant. This two part epoxy polysulfide is easy to handle with a convenient, one to one mix ratio by weight or volume. Shore D hardness is 60-65.
For more information, request a data sheet on EP21TPLV
|
|
|
MasterSil 713: Low Viscosity, One Component Fast Curing Silicone |
|
|
Ideal for smaller encapsulations and conformal coating applications, MasterSil 713 is an easy to use one component silicone with an exceptionally low viscosity. This self leveling system cures rapidly at room temperature and is non-corrosive. Speed of cure depends upon the level of humidity and the thickness of the layer being cured. It can be cured in thicknesses up to ¼ inch deep with superb flexibility and elasticity. MasterSil 713 also offers outstanding electrical insulation properties and is serviceable up to +400°F [+204°C].
For more information, request a data sheet on MasterSil 713
|
|
|
EP42-2LV: Low Viscosity Epoxy Features Outstanding Chemical Resistance |
|
|
Master Bond EP42-2LV is a two component epoxy adhesive, sealant, coating and casting compound featuring outstanding chemical resistance and electrical insulation properties. It is castable to thicknesses exceeding 2-3 inches and is serviceable from -60°F to +300°F [-51°C to +149°C]. The low viscosity of EP42-2LV enables it to be particularly desirable for potting and encapsulations as well as coatings. This epoxy system is ideal for aerospace, electronic, electrical, fiber-optic and optical applications.
For more information, request a data sheet on EP42-2LV
|
|
|
EP3HTMed: Chemically Resistant Polymer Adhesive Meets USP Class VI Specifications |
|
|
Master Bond EP3HTMed fully meets USP Class VI requirements and is formulated to cure at elevated temperatures. It has excellent resistance to radiation, EtO, autoclaving and chemical sterilants. EP3HTMed has a service operating temperature range of -60°F to +400°F [-51°C to +204°C], is 100% reactive and does not contain any diluents or solvents. Another benefit of this single component, no mix epoxy adhesive is its unlimited working life and its thixotropic paste viscosity.
For more information, request a data sheet on EP3HTMed
|
|
 newsletters@masterbond.com
 +1 201 343 8983
Copyright  2016 by Master Bond Inc. All Rights Reserved. This content may not be reproduced in any way without the prior written permission of Master Bond Inc.
|
|
|
|
View this email online
November 2016
