|
UV18S: UV Curable System with Outstanding Chemical Resistance
Widely used in optical, fiber-optic and electronic applications, UV18S features excellent optical clarity and light transmission properties. This toughened, high performance system has a tensile strength exceeding 5,000 psi at room temperature. It cures readily in 20-30 seconds when exposed to a UV light source emitting at a wavelength of 320-365 nm without oxygen inhibition.
|
|
For more information,
request a technical data sheet on UV18S |
|
|
Supreme 46HT-2ND2: Non-Drip, Toughened, Heat Resistant Epoxy
Featuring an attractive balance of superior shear and peel strength, Supreme 46HT-2ND2 is a two component, non-drip, epoxy for structural bonding. It is suitable for applications where long-term exposure to temperatures from -100°F to +500°F is required. This toughened system produces durable bonds which are resistant to thermal cycling as well as a wide variety of chemicals.
|
|
For more information, request a technical data sheet on Supreme 46HT-2ND2 |
|
|
EP21LVMed: Biocompatible Epoxy for Medical Devices
EP21LVMed is a two component, low viscosity epoxy system for high performance bonding, sealing, coating, encapsulating and casting. It produces high strength, durable bonds which hold up well to thermal cycling and resist many chemicals. EP21LVMed fully passes USP Class VI testing and withstands EtO, radiation and many cold sterilants.
|
|
For more information, request a technical data sheet on EP21LVMed |
|
|
EP30LTE-LO: NASA Low Outgassing, Two Component Epoxy
Featuring a remarkably low coefficient of thermal expansion of 15-18 x 10-6 in/in/°C, EP30LTE-LO can be used in bonding, coating, sealing and encapsulation applications. Additionally, it has very good thermal conductivity and is highly electrically insulative. EP30LTE-LO is also noteworthy for its superior dimensional stability.
|
|
For more information, request a technical data sheet on EP30LTE-LO |
|
|
EP15: Special Heat Curing Epoxy for Flame Sprayed Coatings
With a tensile strength in excess of 12,000 psi, EP15 is a heat curing epoxy that is utilized in testing the adhesion or cohesive strength of flame sprayed coatings, as per ASTM specification C633. This one component epoxy is easy to handle and requires no mixing. It has a high bond strength to ceramic and metallic substrates.
|
|
For more information, request a technical data sheet on EP15 |
|
|
LED401 White: Opaque LED Curable System
The uniqueness of LED401 White is its opaque white color which adds a special dimension to light initiated curing systems, since nearly all are either transparent or tinted with dyes. This one part system cures fully tack-free upon exposure to a 405 nm wavelength light source where the presence of any UV light is minimal or incidental.
|
|
For more information, request a technical data sheet on LED401 White |
|
Copyright © 2013 by Master Bond Inc. All Rights Reserved. This content may not be reproduced in any way without the prior written permission of Master Bond Inc.
|
|