View this email online
Logo
November 2014
Ideal for die attach applications, Supreme 3HTND-2DA is a single component epoxy that doesn’t require mixing or freezing. This toughened system has outstanding adhesion, physical strength and electrical insulation properties. It also passes NASA low outgassing tests.

Read More
EP65HT-1
image
EP65HT-1 offers the unique combination of ultra fast cures at room temperature and high thermal stability. This two component epoxy sets up in just 3-5 minutes at 75°F and can withstand temperatures up to 400°F. It has a remarkable glass transition temperature of about 125°C. It also meets NASA low outgassing requirements. Available for use in a convenient application gun, this compound features both superior dimensional stability and tensile strength properties.

For more information, request a data sheet on EP65HT-1
MasterSil 153
image
With remarkable flexibility, MasterSil 153 is a two component silicone for high performance bonding/sealing that does not require exposure to air for complete cross-linking. It offers high temperature resistance and has an exceptionally long working life with very low exotherm upon cure. It bonds well to silicone rubber and has superb electrical insulation properties.

For more information, request a data sheet on MasterSil 153
Supreme 10HTS
image
One component, silver conductive, Supreme 10HTS is a user friendly epoxy system featuring a low volume resistivity of <0.0001 ohm-cm. It is formulated to withstand rigorous thermal cycling as well as thermal and mechanical shocks. Supreme 10HTS fully meets NASA low outgassing specifications. It is serviceable from 4K to +400°F.

For more information, request a data sheet on Supreme 10HTS
Supreme 10AOHT-LO
image
Widely used in applications ranging from electronics and optoelectronics to satellite aerospace and repair, Master Bond Supreme 10AOHT-LO is a one component, thermally conductive, electrically insulative epoxy system that meets NASA low outgassing specifications. It has an impressive strength profile and withstands vibration, impact, shock and rigorous thermal cycling.

For more information, request a data sheet on Supreme 10AOHT-LO
EP3SP5FL
image
Featuring an extraordinary combination of properties, EP3SP5FL is a one component epoxy offering snap cures of 1-2 minutes at 300°F. It has high tensile lap shear strength, superior electrically insulation and is readily reworkable. Additionally, it can withstand exposure to thermal cycling. Shore D hardness at 75°F is >85.

For more information, request a data sheet on EP3SP5FL

Master Bond www.masterbond.com

Email:newsletters@masterbond.com
Phone:+1 201 343 8983
Copyright © 2014 by Master Bond Inc. All Rights Reserved. This content may not be reproduced in any way without the prior written permission of Master Bond Inc.