|
EP42HT-2FG: Food Grade, Heat Resistant Epoxy |
Meeting the most stringent requirements of FDA CFR 175.300, EP42HT-2FG also complies with the NSF/ANSI 51(2009) Standard for Food Equipment Materials as defined in section 4.1. It has wide applicability in the food industry. As an adhesive and sealant, it is well suited for bonding metals, plastics, rubbers and other substrates common to the manufacture of food service equipment. EP42HT-2FG also will resist boiling water, radiation, chemicals, steam and frozen storage conditions.
For more information, request a technical data sheet on EP42HT-2FG
|
| MasterSil 912Med: Biocompatible Silicone Passes USP Class VI Testing |
MasterSil 912Med is a single component silicone with a paste viscosity for bonding, sealing and coating medical devices. This non-corrosive, neutral cure compound complies with USP Class VI and ISO 10993-5 specifications. It resists many kinds of sterilization including gamma and other types of radiation, EtO and some types of liquid sterilants. The service temperature range extends from -75°F to +400°F. MasterSil 912Med withstands rigorous thermal cycling as well as thermal and mechanical shock.
For more information, request a technical data sheet on MasterSil 912Med
|
| MasterSil 710: Complies with MIL-A-46146A Type 1 |
Well suited for the aerospace and electronic industries, MasterSil 710 is a one part silicone system for bonding, sealing, coating and formed in place gasket applications. This non-corrosive, fast setting system has a paste consistency and cures readily at room temperature depending on the thickness of the layer and the humidity. It is translucent and is serviceable over the wide temperature range of -75°F to +400°F.
For more information, request a technical data sheet on MasterSil 710
|
|
EP90FR-V: Passes Vertical Burn Test |
Formulated for specialty aviation applications, EP90FR-V is a two component epoxy system meeting FAR standard 14 CFR 25.853(a) for flame retardancy. The most noteworthy applications include interior panels, door frame lining and floor/door assemblies. Since it is a superior electrical insulator, it is also a candidate for electronic potting and sealing applications. Additionally, it should be noted that EP90FR-V is a non-halogenated system.
For more information, request a technical data sheet on EP90FR-V
|
| EP17HT-LO: Exceptional Chemical & Heat Resistant to 650°F |
Passing ASTM E595 testing for NASA low outgassing, EP17HT-LO is widely used in a variety of applications in the aerospace, oil/chemical processing, optical, opto-electronic and specialty OEM industries. This single component, thermally stable system has a glass transition temperature of 225°C. It has a striking resistance to many chemicals such as acids, bases, salts, fuels, oils and many solvents even at elevated temperatures. Additionally exotherm upon cure is extremely low. EP17HT-LO also has excellent compressive/tensile strength properties.
For more information, request a technical data sheet on EP17HT-LO
|
| MB270NT: Non-Toxic, High Viscosity Ethyl Cyanoacrylate |
MB270NT sets up in just 30-75 seconds at room temperature, depending on the substrate, and is used primarily in applications where ISO 10993-5 for cytotoxicity is specified. This system has a viscosity range of 25,000-30,000 cps, which is certainly out of the ordinary as cyanoacrylates typically have lower viscosities. MB270NT has impressive gap filling capabilities and can fill gaps up to 0.03-0.04 inches thick.
For more information, request a technical data sheet on MB270NT
|
|
|
|
Copyright  2015 by Master Bond Inc. All Rights Reserved. This content may not be reproduced in any way without the prior written permission of Master Bond Inc.
|
|
View this email online
June 2015
