|
Supreme 12AOHT-LO: NASA Low Outgassing Approved, One Part System
|
Cryogenically serviceable Supreme 12AOHT-LO combines superior thermal conductivity with reliable electrical insulation properties. This dimensionally stable epoxy has formidable bond strength, particularly in the shear mode, exceeding 3,500 psi. Its service temperature range extends from 4K to +500°F. Supreme 12AOHT-LO is a toughened system with superior resistance to aggressive thermal cycling and shock.
For more information, request a technical data sheet on Supreme 12AOHT-LO
|
|
EP36AO: Flexible Epoxy for Potting and Encapsulation Applications |
B-staged epoxy, EP36AO, features outstanding thermal shock resistance and thermal conductivity over the wide temperature range of -100°F to +500°F. It is available for use in 30 gram cookies. EP36AO has excellent adhesion to both metallic and non-metallic substrates, plus a high degree of chemical resistance. It also offers exceptional electrical insulation properties.
For more information, request a technical data sheet on EP36AO
|
|
Supreme 10ANHT: Thermally Conductive, High Strength Adhesive
|
Supreme 10ANHT offers both high shear and peel strength along with exceptional thermal conductivity. This unique system provides superior resistance to impact, thermal shock, vibration and stress fatigue cracking while maintaining the moisture, creep, corrosion and thermal resistance typical of epoxy resin adhesives. It cures in 1 hour at 250-300°F and requires no mixing.
For more information, request a technical data sheet on Supreme 10ANHT
|
| EP48TC: Unsurpassed Heat Transfer Capabilities |
Specially formulated, two part epoxy EP48TC has ultra low thermal resistance of 5-7 x 10-6 K•m2/W. This system uses high thermal conductive fillers and is capable of being applied in bond lines as thin as 10-15 microns. It also features unmatched thermal conductivity of 20-25 BTU•in/ft2•hr•°F [2.88-3.60 W/(m•K)]. EP48TC has first rate electrical insulation properties over the wide service temperature range from -100°F to +300°F.
For more information, request a technical data sheet on EP48TC
|
| MasterSil 972TC-LO: Thermally Conductive/Electrically Insulative, Low Outgassing Silicone |
MasterSil 972TC-LO is capable of transferring heat while retaining superior dielectric properties. It bonds well to a wide variety of substrates, including metals, composites, glass, ceramics as well as many types of rubber and plastics. This system has very good flexibility and high elongation. It can withstand aggressive thermal cycling as well as thermal and mechanical shock. MasterSil 972TC-LO is 100% solid and has a white color.
For more information, request a technical data sheet on MasterSil 972TC-LO
|
|
|
|
Copyright  2015 by Master Bond Inc. All Rights Reserved. This content may not be reproduced in any way without the prior written permission of Master Bond Inc.
|
|
View this email online
September 2015
