grey_red-2line-web
shutterstock_39259987 2
1001113101
Speed Your Production with Adhesives that Cure in a Flash
#5:

Master Bond UV15-7
Featuring excellent optical clarity, this one component epoxy is not oxygen inhibited. It cures readily in 10-30 seconds when exposed to a UV light source emitting at a wavelength of 320-365 nm with an energy output as low as 20-40 milliwatts per cm².  UV15-7 also offers high physical strength properties, low shrinkage upon curing and good non-yellowing stability.

#4:
Master Bond EP30-4
This two part epoxy is especially recommended where a thin layer of epoxy needs to cure very rapidly without adding external heat. Films as thin as 0.025 inches can become tack free in under 30 minutes. EP30-4 features a low viscosity with superior adhesion to similar and dissimilar substrates.

#3:
Master Bond LED403Med
LED403Med is a one part LED system that cures fully upon exposure to a 405 nm wavelength LED light. In thinner sections, full cures can be achieved in 15-30 seconds (sometimes less than that), while thicker sections require longer cure times. This system resists various sterilization methods, fully passes the plastics test for USP Class VI biocompatibility and ISO 10993-5 cytotoxicity requirements.
#2:
Master Bond EP3FL
Ideal for potting and encapsulation of sensitive electronic components, EP3FL can be cured in sections up to 1/4 inch thick. Its flexibility and toughness permit it to adjust to both thermal and mechanical stresses without damaging such components. This one component epoxy system combines high physical strength properties, remarkable thermal shock and heat resistance and excellent electrical insulation characteristics.

#1:
Master Bond EP24AN
EP24AN is a fast curing, two component room temperature curing adhesive, sealant and coating that has high thermal conductivity of over 22 BTU•in/ft2 •hr•°F. The rapid cure of EP24AN makes it a desirable system for many field applications. In this regard, EP24AN possesses the unique property of curing at temperatures as low as 20°F. It also has a very convenient one to one mix ratio by weight or volume.


Master Bond | 154 Hobart Street Hackensack, NJ 07601 | +1 201-343-8983
newsletters@masterbond.com | www.masterbond.com
DSC5252_alt

Our fast cure formulations are available in both one and two component systems and are widely used by manufacturers seeking maximum efficiency and greater productivity. Many of these formulations have the ability to cure over the course of a few seconds to several minutes.

Master Bond's fast cure product line offers a wide selection of:
  • Epoxies
  • Polyurethanes
  • Silicones
  • Instant curing cyanoacrylates
  • UV cure systems
  • LED cure systems

In case you missed it...


cooltext795389642


Contact Master Bond to see which adhesive system is right for your application.


Follow us on:
linkedin     facebook    youtube