Master Bond UV10TKLO-2 is a special one component UV curable epoxy modified system for high performance bonding, sealing and encapsulation. This system can be cured in thicker sections, up to 1/16 of an inch and can be easily “layered” to higher levels. Most significantly, its low outgassing properties enable this UV compound to be used in a wide array of optical, electro-optical and vacuum applications that until now have been “off limits” for UV curable epoxies.

Certified to meet stringent FDA CFR 175.300 specifications, EP42HT-2FG resists many chemicals and solvents, along with boiling water, fats and oils up to 450°F. This food grade system was also toxicologically evaluated to meet the NSF/ANSI 51.4.1 (2009) standard for food equipment materials. As an adhesive and sealant, it is well suited for bonding metals, plastics, rubbers and other substrates common to the manufacture of food service equipment.

Master Bond EP30Med is a two component, room temperature curing epoxy adhesive designed for high performance medical applications. It features high bond strength, superior durability and outstanding chemical resistance. This biocompatible system is widely used in the manufacturing of medical devices. It also meets FDA requirements for indirect food contact as per FDA CFR 175.105.

Featuring a non-halogenated filler, EP21FRNS-2 is a two component, room temperature curing epoxy offering low smoke generation for potting, encapsulating and casting applications. As per the UL 94V-0 specification, this system is serviceable over the wide temperature range of -60°F to 200°F. It is remarkably resistant to thermal cycling and many chemicals. EP21FRNS-2 is exceptionally durable and tough and features a convenient one to one mix ratio by weight.

Well suited for the aerospace and electronic industries, MasterSil 710 is a one part silicone system for bonding, sealing, coating and formed in place gasket applications. This non-corrosive, fast setting system has a paste consistency and cures readily at room temperature depending on the thickness of the layer and the humidity. It is translucent and is serviceable over the wide temperature range of -75°F to +400°F.

With a tensile strength in excess of 12,000 psi, EP15 is a heat curing epoxy that is utilized in testing the adhesion or cohesive strength of flame sprayed coatings, as per ASTM specification C 633. This one component epoxy is easy to handle and requires no mixing. It has a high bond strength to ceramic and metallic substrates and forms rigid, dimensionally stable bonds with a service temperature range of -60°F to +250°F.