Master Bond EP29LPHE is a two component epoxy system with a low mixed viscosity of 350-700 cps. This low shrinkage/low exotherm product is particularly well suited for large volume casting applications as well as bonding, coating and sealing.
Ideal for potting and encapsulation applications, MasterSil 157 is a two component silicone system that features low viscosity and low exotherm. It has superior electrical insulation properties and can cure in sections beyond 1 inch thick.
Master Bond Supreme 3HTND-2DM is a rapid curing, toughened, one part epoxy system used for the dam-and-fill method for chip-on-board encapsulation. Essentially, there are two methods to protect chips and their wire bonds. One method is referred to as glob top, where the encapsulating system is dispensed and applied directly to the area to be protected.
Master Bond EP30LP-2 is a two component epoxy with a low viscosity and a volume resistivity of over 1014 ohm-cm, making it well suited for potting and encapsulation applications. This high performance system can also be used for bonding and sealing.
Formulated for use in demanding thermal management applications, Master Bond EP30TC is a two component epoxy that contains a robust thermally conductive filler with very fine particle sizes. This NASA low outgassing certified system can be used for bonding, coating, sealing and encapsulating for the aerospace, electronic, optical and OEM industries.
Master Bond EP3HTND-2Med Black is a high strength, fast curing epoxy for use in the assembly of medical devices. It fully meets USP Class VI specifications. This one part system delivers superior resistance to a variety of sterilization methods such as chemical sterilants, EtO, radiation and especially autoclaving.