Formulated for bonding, sealing, coating and encapsulation applications, Master Bond EP41S-5 is a room temperature curing epoxy that combines a high strength profile, superior electrical insulation values and exceptional chemical resistance. This system can be used in the aerospace, electronic, power, chemical processing, specialty OEM and other industries.
Master Bond EP3UF is a one component epoxy that contains thermally conductive fillers with very small particle sizes imparting a low thermal resistance of 5-7 x 10-6 K•m2/W. This low viscosity system has good flow properties and can be applied in bond lines as thin as 10-15 microns.
Master Bond UV22DC80*** is a one component, low viscosity, nanosilica filled epoxy based system for bonding, sealing and coating with the ability to cure under UV light and/or with heat. The UV portion of the cure can be achieved in seconds upon exposure to a UV light at 365 nm with 20-40 milliwatts/cm2 of energy.
Well suited for large potting and encapsulation applications, Master Bond EP29LPAO is a cost effective, two part system with a low viscosity, excellent flow properties and heat dissipation properties. Featuring convenient processing, this epoxy has a forgiving 100 to 50 mix ratio by weight and a pot life of 7-9 hours at room temperature for a 100 gram mass.
Master Bond EP3HTS-LO is a single component epoxy for demanding bonding, sealing and coating applications. This system passes ASTM E595 tests for NASA low outgassing, making it well suited for use in the aerospace, electronic, microelectronic and optical industries.
Master Bond EP113 is a nanosilica filled epoxy that delivers enhanced dimensional stability and exceptionally low shrinkage upon curing. This optically clear, two component system is well suited for applications in the aerospace, electronic and OEM industries.