Master Bond UV15RCL is a low viscosity, cationic type UV curing system with a special color changing feature.
The originally red material changes to clear once exposed to UV light, indicating that there is UV light access across the adhesive material.

Master Bond Supreme 11AOHTMed is a two component epoxy featuring thermal conductivity and electrical insulation.
This system fully passes ISO 10993-5 testing for non-cytotoxicity and is recommended for bonding and sealing in medical device applications.

EP42HT-2FG Black is a two part, moderate heat cured epoxy with high temperature resistance that complies
with FDA 21 CFR 175.105 for indirect food contact applications. The epoxy withstands exposure to a wide range of harsh chemicals,
including acids, bases, and solvents. It possesses good flow properties and can be employed for bonding, sealing, potting, and casting.

Master Bond UV23FLDC-80TK is a moderate viscosity, cationic type system that offers both UV light and heat curing mechanisms.
It cures readily within 20-30 seconds when exposed to a UV light source emitting a wavelength of 320-365 nm.
The adhesive can also undergo a secondary heat curing for shadowed areas, typically curing in 60-90 minutes at 80-85°C.

Designed for medical device manufacturing, MasterSil 711Med passes ISO 10993-5 testing.
It is a one part, flowable, room temperature vulcanizing (RTV) silicone which needs no mixing, and can be used for bonding, sealing,
coating and form-in-place gasketing applications. This non-corrosive, translucent compound withstands many sterilization methods,

Master Bond Supreme 17HTND-2 is a toughened epoxy system for bonding and sealing applications.
It is a true one component system, not premixed and frozen, with an unlimited working life at room temperature.
Supreme 17HTND-2 is thermally stable, featuring a high glass transition temperature (Tg) of 410°F (210°C).

Pages