Master Bond EP5TC-80 is a one part, NASA low outgassing rated epoxy that achieves a thermal conductivity of 3.3-3.7 W/(m·K),
while also retaining its electrical non-conductivity. It requires a cure at only 80°C for 1.5 to 2 hours.
To optimize performance properties a post cure of 1-2 hours at 80°C is recommended.
Master Bond MasterSil 323AO-LO is a two component silicone elastomer with a self-priming feature, designed for bonding, sealing and gap filling applications.
This electrically insulating and thermally conductive compound meets NASA low outgassing specifications and can be used in the
aerospace, electronic, opto-electronic and specialty OEM industries.
Master Bond EP4CL-80Med is a one part, optically clear epoxy developed for use in medical device assembly applications.
It withstands repeated sterilization cycles and passes ISO 10993-5 testing for non-cytotoxicity.
This product cures at moderate temperatures of around 80-85°C within 60 to 90 minutes and faster at slightly higher temperatures.
Master Bond EP40ND is a two component epoxy system, designed for bonding, sealing and coating applications.
It is a non-drip, toughened system with an easy to use 1:1 mix ratio by weight or volume. EP40ND meets NASA low outgassing specifications and has a high elongation of 80-90% at 75°F.
Master Bond EP17TF is a one part epoxy with a paste consistency, that can be readily dispensed evenly and uniformly.
It has a moderately high glass transition temperature (Tg) of 150-155°C and a wide service temperature range from -150°F to +550°F.
Designed to compensate for thermal mismatches, this compound resists impact, vibration, shock and rigorous thermal cycling.
Master Bond UV17Med is a one part, no mix, UV curable system. It was specially formulated to provide excellent adhesion to many TPUs (thermoplastic polyurethanes),
which are widely recognized as challenging substrates for bonding. This compound provides very good toughness with a high elongation of 50-60%.
UV17Med passes stringent ISO10993-5 cytotoxicity standards.