Master Bond Supreme 11AOHTMed is a two component epoxy featuring thermal conductivity and electrical insulation.
This system fully passes ISO 10993-5 testing for non-cytotoxicity and is recommended for bonding and sealing in medical device applications.

EP42HT-2FG Black is a two part, moderate heat cured epoxy with high temperature resistance that complies
with FDA 21 CFR 175.105 for indirect food contact applications. The epoxy withstands exposure to a wide range of harsh chemicals,
including acids, bases, and solvents. It possesses good flow properties and can be employed for bonding, sealing, potting, and casting.

Master Bond UV23FLDC-80TK is a moderate viscosity, cationic type system that offers both UV light and heat curing mechanisms.
It cures readily within 20-30 seconds when exposed to a UV light source emitting a wavelength of 320-365 nm.
The adhesive can also undergo a secondary heat curing for shadowed areas, typically curing in 60-90 minutes at 80-85°C.

Designed for medical device manufacturing, MasterSil 711Med passes ISO 10993-5 testing.
It is a one part, flowable, room temperature vulcanizing (RTV) silicone which needs no mixing, and can be used for bonding, sealing,
coating and form-in-place gasketing applications. This non-corrosive, translucent compound withstands many sterilization methods,

Master Bond Supreme 17HTND-2 is a toughened epoxy system for bonding and sealing applications.
It is a true one component system, not premixed and frozen, with an unlimited working life at room temperature.
Supreme 17HTND-2 is thermally stable, featuring a high glass transition temperature (Tg) of 410°F (210°C).

Master Bond EP21LVFL combines good flexibility with a solid strength profile.
It is curable at room temperature with a long working life of 120-160 minutes at 75°F for a 100 gram batch and features
a flowable initial mixed viscosity of 10,000-14,000 cps. This epoxy generates low exotherm making it