Two Component Epoxy Adhesive For Fast "5 Minute" Cure, High Performance General Purpose Bonding and Sealing

Master Bond Polymer Adhesive EP51ND is a high viscosity, fast "5 minute" curing two component epoxy adhesive for general purpose bonding formulated to cure at room temperature with a one-to-one mix ratio by weight or volume. It readily develops a high bonding strength of more than 2000 psi at room temperature. The bonding strength is relatively insensitive to cleaning procedures. This high viscosity adhesive can be applied on vertical surfaces without dripping or flow. Master Bond EP51ND gels in about 5 minutes and cures within a few hours at ambient temperatures. Bonded parts can be safely handled within a half hour. It produces durable high strength and tough bonds which are remarkably resistant to thermal cycling and chemicals including water, oil and most organic solvents, over the exceptionally wide temperature range of -100°F to more than +250°F. Adhesion to metals, glass, ceramics, wood, vulcanized rubbers and many plastics is excellent. The hardened adhesive is an electrical insulator. Master Bond EP51ND adhesive is widely used in the electronic, electrical, computer, construction, metalworking, appliance, automotive and chemical industries. It is suggested that Master Bond EP51ND be mixed in small quantities because of its fast gelling properties. It is highly recommended for production line assemblies and high speed bonding operations. It is 100% reactive and does not emit any volatiles during cure.