Expanded Product List
Master Bond Product Search
609 products match
 |
MasterSil 971-LO Meets ASTM E595 specifications for low outgassing. Optically clear, two part system with one to one mix ratio by weight. Serviceable from -120°F to +400°F. First class electrical insulator. |
 |
MasterSil 973S-LO Silver filled, two part, addition cured type silicone. Excellent electrical conductivity. Passes NASA low outgassing test requirements. Highly flexible. Service temperature range from -120°F to +400°F. Volume resistivit >0.004 ohm-cm. |
 |
MasterSil 980 Two part, fluorosilicone for bonding, sealing, coating. Enhanced chemical resistance. Withstand exposure to gasoline, diesel fuel, motor oil, ethanol. Serviceable from -85°F to +465°F. Cures well in wide and deep sections. Moderate viscosity. |
 |
MasterSil Primer 718 Master Sil Primer 718 is a specially formulated silicone primer for use with Master Sil RTV silicone elastomers and sealants to promote adhesion to various difficult-to-bond substrates such as acrylics, ABS, polycarbonates, polyphenylene oxides, polysulfones, polyesters, styrenics, rigid PVC's, etc. It is a one component, low viscosity colorless liquid which can be applied by such methods as brushing, wiping or dipping. |
 |
MB250NT Low viscosity ethyl cyanoacrylate. Rapid curing at room temperature; usually sets up within 40 seconds. Passes ISO 10993-5 for cytotoxicity. Resistant to EtO and gamma sterilization. Serviceable from -60°F to +250°F. |
 |
MB295 Transparent adhesive. Shore A hardness 85. Bonds well to metals, plastics, glass, rubbers. Fast curing. Viscosity 1,300 to 1,700 cps. |
 |
MB297 Higher viscosity (2,200-2,400 cps) and a slightly longer open time than low viscosity counterparts. High strength, rapid curing ethyl cyanoacrylate system. No heating or mixing needed. Good resistance to cleaning agents. Serviceable from -60°F to +250°F. |
 |
MB297FL Flexibilized cyanoacrylate adhesive offers improved resistance to vibration.1,500-1,800 cps viscosity. Serviceable from -65°F to +185°F. |
 |
MB297FLNT Low viscosity ethyl cyanoacrylate. Rapid curing at room temperature; usually sets up within 40 seconds. Passes ISO 10993-5 for cytotoxicity. Resistant to EtO and gamma sterilization. Serviceable from -60°F to +250°F. |
 |
MB297Med Fast setting. Viscosity 2,000 - 2,400 cps. Biocompatible. Resists EtO and gamma sterilization. Passes USP Class VI testing. Bonds well to metals, plastics, rubbers, glass. Serviceable from -60°F to +250°F. |