One Component, Heat Curing Epoxy Adhesive, Sealant Featuring Both High Shear and High Peel Strength for Optimal Bonding Performance and Exceptionally High Thermal Conductivity

Master Bond Polymer System Supreme 3AN is a one component, heat cured epoxy adhesive and sealant, featuring high peel and shear strength along with excellent thermal conductivity and convenient handling. Supreme 3AN cures readily at 250°F in 20-30 minutes; and at 300°F in 5-10 mintues. Minimum curing temperature is 235°F. Being a one part system, no mixing is required and the working life is unlimited as it never cures at room tempeature. The shelf life is 6 months in original closed containers.

Master Bond Polymer Adhesive Supreme 3AN produces remarkably good bonds with both high shear and high peel strength for service over a wide temperature range of -100°F to +250°F. It offers very superior resistance to impact, thermal shock, vibration and stress fatigue cracking while maintaining the moisture, creep, corrosion and heat resistance typical of epoxy resin adhesives. Master Bond Adhesive Supreme 3AN can be applied without sagging or dripping even on vertical surfaces. It is 100% reactive and does not contain any diluents or solvents.

Supreme 3AN forms high strength and exceptionally tough bonds which are remarkably resistant to severe thermal cycling and many chemicals including water, oil, fuels, and most organic solvents even upon prolonged exposures. Adhesion to metals, glass, ceramics, wood vulcanized rubbers and many plastics is excellent. The hardened adhesive has outstanding thermal conducivity and is also a superior electrical insulator. It is widely used in aerospace, electronic, electrical, computer, automotive and chemical applications especially where convenient handling and rapid curing along with outstanding physical properties all are of critical importance.