Master Bond Product Search

48 products match

EP46HT-2Med Two Component Epoxy EP46HT-2Med

USP Class IV approved, heat resistant epoxy adhesive. Glass transition temperature in excess of 220°C. Withstands repeated exposure to autoclaving, radiation and chemical sterilants. High bond strength. Superior durability. Serviceable from -100°F to +500°F. Electrically insulative SUitable for potting.

One Part Epoxy EP4CL-80Med EP4CL-80Med

One component, ultra low viscosity epoxy that offers thermal and electrical insulation and is optically clear.

EP4G-80Med

Graphite filled epoxy that cures at 80°C. Good electrical and thermal conductivity. Passes NASA low outgassing certification. Can be used for bonding, sealing, coating. Unlimited working life at room temperature. Service temperature range is -50°C to +175°C

Two Component Epoxy EP62-1HTMed EP62-1HTMed

Superior sterilization resistance. Two part epoxy has long pot life at ambient temperatures. High bond strength properties. Ideal for bonding and coating. Good flow. Reliable electrical insulator. Serviceable from -60°F to +450°F. Tg 150-160°C. Shore D hardness 80-90.

EP62-1LPSPMed Two Component Epoxy EP62-1LPSPMed

Ultra low viscosity, toughened epoxy with superior electrical insulation properties. Thermal stability. Exceptional sterilization resistance. Long working life. Low exotherm. Passes USP Class VI and ISO 10993-5 requirements. Serviceable from -150°F to +400°F.

Two Part Epoxy EP62-1LPSPMed White EP62-1LPSPMed White

Sterilization resistant, cryogenic ISO 10993-5 epoxy for medical device assembly. White pigment. Low viscosity.

EP62-1Med Two Component Epoxy System EP62-1Med

Two part epoxy requiring moderate heat curing (80-120°C). Meets USP Class VI biocompatibility specifications. Superb resistance to repeated autoclaving along with excellent adhesion to high temperature plastics such as Ultem, PEEK, etc. Exceptionally long working life. Outstanding electrical insulation properties. Serviceable from -60°F to +450°F.

EP77M-FMed Two Part Epoxy EP77M-FMed

Rapid room temperature curing silver filled electrically conductive adhesive. One to one mix ratio by weight or volume. Fixture time within 5-7 minutes even in small volumes. Exceptional low volume resistivity. Low outgassing. Superior bond strength to similar/dissimilar substrates/ Serviceable from -60°F to +250°F.

LED403Med One Part LED Curing System LED403Med

One part, high viscosity system. Cures tack-free without any oxygen inhibition. Meets USP Class VI specifications; also passes ISO 10993-5 cytotoxicity test. Resists gamma radiation, EtO and various chemical sterilants. Serviceable from -60°F to +250°F.

LED405Med

One part, cures tack-free without any oxygen inhibition. Passes ISO 10993-5 cytotoxicity test. Serviceable from -60°F to +250°F. Superb optical clarity.

Pages