Master Bond Product Search

542 products match

EP17HT-3 One Part Snap Curing Epoxy EP17HT-3

One part snap cure epoxy. Cures in 2-3 minutes at 250-300°F. Service operating temperature range -60°F to +400°F. Ideal for bonding dissimilar substrates and applications subject to thermal cycling. Outstanding electrical insulation properties. Withstands 1000 hours at 85°C/85%RH.

EP17HT-LO One Part Epoxy EP17HT-LO

One part, no mix epoxy meets NASA low outgassing specifications. Serviceable up to 650°F. Tg is 225°C. High shear, tensile and compressive strength properties. Cures in 90-120 minutes at 300F. Withstands 1000 hours 85°C/85% RH.

EP17HTDA-1 One Part Epoxy EP17HTDA-1

Single component heat curable epoxy epoxy adhesive/sealant. Non-drip system. Resists up to 650°F. Meets NASA low outgassing specifications. Meets MIL-STD-883J Section 3.5.2 for thermal stability. High lap shear, tensile and compressive strength. Tg of 230-240°C after post cure.

One Part Epoxy EP17HTDM-2 Black EP17HTDM-2 Black

One component, heat cured epoxy for bonding and sealing, as well as die attach applications. Flowable, high viscosity system, cures in 4-6 hours at 300°F or 2-3 hours at 350°F. Post curing at 400°F for 1-2 hours to optimize properties. Limited flow and low exotherm when curing.

EP17HTND-2 One Part, Heat Cure Epoxy EP17HTND-2

Single component heat curable epoxy epoxy adhesive/sealant. Non-drip system. Resists up to 650°F. Meets NASA low outgassing specifications. High lap shear, tensile and compressive strength. Tg of 230-240°C after post cure.

EP17HTND-CCM One Part Epoxy EP17HTND-CCM

Single component heat curable epoxy epoxy adhesive/sealant. Non-drip system. Resists up to 650°F. Meets NASA low outgassing specifications. High lap shear, tensile and compressive strength. Tg of 230-240°C after post cure.

Electrically Conductive Die Attach Epoxy EP17HTS-DA EP17HTS-DA
EP19HT One Component Epoxy System EP19HT

One component, storage stable epoxy resin system. Viscosity 500-600 cps. Tensile strength over 10,000 psi. Excellent chemical resistance. Thermal stability up to +400°F. Superb electrical insulation properties. Withstands 1,000 hours 85°C/85% RH. Serviceable from -60°F to +400°F.

EP19HTFL One Part Epoxy EP19HTFL

Toughened, ultra low viscosity no mix formulation. Shore D hardnes >65. Resists impact and thermal cycling. Light amber clear color. Outstanding physical strength properties. Used for sealing/impregnation of porous surfaces. Serviceable from -60°F to +350°F.

EP19HTLV One Component Epoxy EP19HTLV

Ultra low viscosity, thermally stable high performance system. Tg 125-130°C. Resists water, oils, fuels and most solvents. Superior adhesion to metal and ceramics. "Unlimited" working life at room temperature. Serviceable up to 400°F. Ideal for impregnation of porous surfaces.

Pages