431 products match
EP37-3LV Clear, two component epoxy system has long pot life. Convenient one to one mix ratio. High bond strength. Superb chemical resistance properties. Used in bonding, sealing, potting and filament winding applications. Low viscosity compound. Exceptionally low exotherm. Cures rigid. Service operating temperature range from -60°F to +250°F. |
|
EP39-2 Low viscosity, two component epoxy system. Superior light transmission properties. Rigid curing. Short tack-free time. Can be applied by roller, brush or conventional spraying equipment. Superior chemical resistance. Serviceable from -60°F to +300°F. Successfully tested for 1,000 hours 85°C/85% RH. Guards against wear. |
|
EP39-2LV Fast curing, chemical resistant epoxy system. Convenient two to one mix ratio by weight. Superior protection against wear. 100% reactive. Optically clear. Easy application by brush, roller, spray equipment. Cures rigid. Ideal for polishing. Service temperature range -60°F to +300°F. |
|
EP39-M Two part epoxy adhesive/sealant featuring excellent electrical insulation properties. Thermal stability. Superior chemical resistance. Guards against thermal cycling. Adheres well to similar/dissimilar substrates. Low viscosity. Serviceable from -60°F to +350°F. |
|
EP39MHT Low viscosity potting/encapsulation compound. Superior dielectric properties. Versatile cure schedules. Convenient one to one mix ratio weight or volume. Minimal shrinkage and stress development. Resists thermal cycling and mechanical shocks. Successfully tested for 1,000 hours 85°C/85% RH. Service temperature range -100°F to +400°F. |
|
EP3FL Flexibilized one part epoxy system. Withstands severe environmental conditions in service. 100% reactive. Brown/yellow color. Resists thermal and mechanical stresses. Low shrinkage. Serviceable from -100°F to +250°F. |
|
EP3HT Fast, one component heat curable adhesive. Serviceable from -60°F to +400°F. High shear strength properties. Shore D hardnes >70. "Unlimited" working life at room temperature. Superb electrical insulator. Withstands 1,000 hours 85°C/85% RH. |
|
EP3HT-LO Rapid curing, one part epoxy. Meets NASA low outgassing standards. Moderate viscosity. High shear strength. Serviceable from -60°F to +400°F. Withstands 1,000 hours 85°C/85% RH. |
|
EP3HTFL Heat resistant, flexibilized one component epoxy resin system. Superior physical strength properties. Inert to water and chemicals. Provides protection against rigorous thermal cycling and mechanical stress. Serviceable from -60°C to +175°C. |
|
EP3HTMed Rapid curing, one part epoxy. Meets USP Class VI biocompatibility standards. Thixotropic paste viscosity. High shear strength. Superb resistance to autoclaving, chemical sterilants, radition, EtO. Serviceable from -60°F to +400°F. |