Master Bond Product Search

610 products match

Supreme 10ANHT-LO One Part Epoxy Supreme 10ANHT-LO

NASA low outgassing approved one component thermally conductive epoxy adhesive. Cryogenically serviceable. Smooth paste consistency. Low coefficient of thermal expansion. Effective shear and peel strength. Stellar electrical insulation properties. Serviceable from 4K to +400°F.

Supreme 10AOHT One Part Epoxy System Supreme 10AOHT

One part, oven cured epoxy system with excellent thermal conductivity and superb resistance to thermal cycling. Primarily used for bonding of heat sinks and sensors where heat transfer is desirable. Serviceable from 4k to +400°F. Convenient processing.

Supreme 10AOHT-LO One Part Epoxy System Supreme 10AOHT-LO

Thermally conductive and electrically insulative, one part epoxy adhesive. Superior toughness and dimensional stability. Bonds are resistant to thermal cycling and many chemicals. Serviceable from 4K to +400°F. NASA low outgassing approved. Withstands 1,000 hours 85°C/85% RH. Impressive physical strength properties.

Supreme 10HT One Part Epoxy Supreme 10HT

One part structural epoxy with high bond strength and excellent adhesion to similar and dissimilar substrates, especially composite materials. Requires oven curing at 250-300°F. NASA low outgassing approved. Serviceable from 4k to +400°F. Tough and durable. 85°C/85% RH resistance.

Supreme 10HTCL Single Component Epoxy Supreme 10HTCL

Single component toughened epoxy adhesive with good flow properties. Resistant to thermal cycling, mechanical vibration/shock. Tensile lap shear strength 2,800-3,000 psi. T-peel strength 25-30 pli. Cures in 60-75 minutes at 250°F, shorter times at higher temperatures. Successfully tested at 1,000 hours 85°C/85% RH. Serviceable from 4k to +400°F.

Supreme 10HTF-1 One Part Epoxy Compound Supreme 10HTF-1

Fast curing one component thixotropic paste epoxy. Excellent bond strength. Superb toughness and durability. Viscosity remains constant with time. Solid chemical resistance. Reliable electrical insulator. Serviceable from 4k to +400°F.

Supreme 10HTFL One Component Epoxy Supreme 10HTFL

Highly flexible, no mix adhesive. Offers outstanding peel strength. 100% reactive. Superior water and chemical resistance. Successfully tested for 1,000 hours 85°C/85% RH. Withstands rigorous thermal cycling. Serviceable from 4k to +350°F.

Supreme 10HTN One Part Epoxy Supreme 10HTN-NV

High peel and shear strength single component nickel filled epoxy adhesive. Thixotropic system. Cost effective electrical conductivity. Resists from 4k to +400°F.

Supreme 10HTS One Part Epoxy Supreme 10HTS

Silver filled system with excellent electrical conductivity and high physical strength properties. One part, heat cured (250-300°F) epoxy. Wide range of serviceability from cryogenic temperatures up to +400°F. Meets NASA low outgassing specifications. Can be applied without sagging or dripping, even on vertical surfaces. Volume resistivit <0.006 ohm-cm. Thermally conductive. Shore D hardnes >75.

Supreme 11 Two Component Epoxy Supreme 11

High shear/peel strength epoxy adhesive. Two component system offers one to one mix ratio by weight or volume. Temperature range from -100°F to +300°F. Resists impact, thermal shock and stress cracking fatigue. Excellent long-term durability. Easy application.