Master Bond Product Search

122 products match

MasterSil 152 Two Part Silicone System MasterSil 152

Low viscosity, optically clear condensation curing system. Superb flexibility and electrical insulation properties. Long pot life. Will cure in section >1 inch. Low exotherm. Elongation 150-180%. Serviceable from -65°F to +400°F.

MasterSil 157 One Component Silicone MasterSil 157

Two component low viscosity silicone system. Ideal for potting and encapsulation. Does not require air for curing. Low exotherm; very long pot life. Enhanced low temperature serviceability. Service temperature range of -175°F to +500°F. Superior electrical insulator.

MasterSil 170 Gel: Two part silicone encapsulant MasterSil 170 Gel

Two part, low viscosity silicone gel for sealing, potting and encapsulating applications. Outstanding flexibility. Superior electrical insulation properties. Exceptional optical clarity. Serviceable from -67°F to +392°F.

MasterSil 415 One Part Silicone Elastomer MasterSil 415

Optically clear, room temperature curing, no mix acetoxy type system. Good bond strength and outstanding elasticity. Serviceable from -185°F to 400°F.

MasterSil 920-LO One Part Silicone System MasterSil 920-LO

RTV silicone for sealing, coating and small encapsulation. NASA low outgassing approved. Superb optical clarity. Good flow properties. Non-corrosive. Soft durometer facilitates usage with sensitive components. Excellent electrical insulator. Withstands thermal cycling.

MasterSil 971-LO Two Part Epoxy MasterSil 971-LO

Meets ASTM E595 specifications for low outgassing. Optically clear, two part system with one to one mix ratio by weight. Serviceable from -120°F to +400°F. First class electrical insulator.

MB250NT One Part Ethyl Cyanoacrylate System MB250NT

Low viscosity ethyl cyanoacrylate. Rapid curing at room temperature; usually sets up within 40 seconds. Passes ISO 10993-5 for cytotoxicity. Resistant to EtO and gamma sterilization. Serviceable from -60°F to +250°F.

MB260NT One Part Cyanoacrylate System MB260NT

Low odor, low bloom no mix ethyl cyanoacrylate adhesive. Meets ISO 10993-5 requirements for low toxicity. High shear strength. Fast curing system. Serviceable from -60°F to +250°F.

MB270NT One Part Cyanoacrylate System MB270NT

High viscosity ethyl cyanoacrylate passes ISO 10993-5 cytotoxicity specifications. Bond well to a variety of substrates. Contact pressure usually sufficient for fixturing. Serviceable from -60°F to +250°F.

MB295 Cyanoacrylate Adhesive MB295

Transparent adhesive. Shore A hardness 85. Bonds well to metals, plastics, glass, rubbers. Fast curing. Viscosity 1,300 to 1,700 cps.