Expanded Product List
Master Bond Product Search
431 products match
 |
MB318 One component ethyl cyanoacrylate. Viscosity 2,400 cps. Black color. Slower set times than typical cyanoacrylate adhesives. Serviceable from -65°F to +250°F. |
 |
MB350 Low viscosity alkoxyethyl cyanoacrylate. High strength, rapid curing. Low odor, low bloom system. No mixing or heating needed. Good resistance to cleaning agents. Serviceable from -60°F to +250°F. |
 |
MB525 Master Bond Polymer System, MB525, is a high performance epoxy hot melt compound designed to provide excellent adhesion to metals, glass, wood and other substrates. It exhibits a comparatively low softening point of 190-220°F, low viscosity at 300°F and low peel values. Bond strength develops rapidly and is maintained over a wide temperature range (-25°F to +130°F). |
 |
MB600 Environmentally safe, water soluble, one part system. Thermal stability up to +1,500°F. Outstanding strength, dimensional stability and electrical insulation properties. Completely odorless, non-toxic and non-flammable. Cures obtained at moderately elevated temperatures. |
 |
MB6A For deflashing and decapsulation of cured epoxy resin compounds. One part system is 100% biodegradable. Initiates and promots disintegration by flaking and breaking. |
 |
Steelmaster 43HT Stainless steel filled epoxy with rapid cure speed at room temperature. Exceptionally high compressive strength. 100% solid system. Readily machinable after cure. Rebuilds worn metal parts. Serviceable from -60°F to +400°F. |
 |
Super Gel 9 Two part, room temperature curing, epoxy gel compound for sealing and encapsulation. Optically clear, soft and dimensionally stable. Ideal for retrievability. Two to one mix ratio by weight or volume. Low exotherm. Long working life. Low viscosity system. Unsurpassed thermal cycling and mechanical shock resistance. Used in conjunction with sensitive electronic and optical components. Serviceable from -100°F to +200°F. |
 |
Supreme 10 One component structural adhesive serviceable up to +350°F. High shear and peel strength. Superior resistance to impact, vibration, thermal cycling, stress fatigue cracking, creep. Gray color. Flowable paste viscosity. |
 |
Supreme 10HT One part structural epoxy with high bond strength and excellent adhesion to similar and dissimilar substrates, especially composite materials. Requires oven curing at 250-300°F. NASA low outgassing approved. Serviceable from 4k to +400°F. Tough and durable. 85°C/85% RH resistance. |
 |
Supreme 10HTCL Single component toughened epoxy adhesive with good flow properties. Resistant to thermal cycling, mechanical vibration/shock. Tensile lap shear strength 2,800-3,000 psi. T-peel strength 25-30 pli. Cures in 60-75 minutes at 250°F, shorter times at higher temperatures. Successfully tested at 1,000 hours 85°C/85% RH. Serviceable from 4k to +400°F. |