OEM

Master Bond EP51FL is a new two component, highly flexible epoxy resin system developed by Master Bond Inc., Hackensack, N.J. for high performance bonding. EP51FL has a 1 to 1 mix ratio, weight or volume. It cures rapidly at room temperature and has a setup time of 30-40 minutes. Cure speeds can be accelerated by the use of heat. It is a 100% reactive system and no solvents or volatiles are emitted during cure.

Master Bond EP51FL has excellent bond strength to many different substrates including metals, glass, ceramics, wood, various rubbers and most plastics. The cured compound exhibits a remarkably high peel strength of more than 25 pli along with an elongation of >125%. It has superb electrical insulation properties and outstanding resistance to many chemicals. Particularly noteworthy is its ability to withstand thermal and mechanical shocks.

EP51FL has a service operating temperature range of 4K to 250°F. It is recommended for use in cryogenic applications. It has a Shore D hardness of 12-15 and a Shore A hardness of 55-60. EP51FL exhibits a tensile strength of 1,150 psi.

Master Bond EP51FL has a mixed viscosity of 70,000-80,000 cps and is easy to apply. A paste version called EP51FLND is also available when a "non-drip" system is required. EP51FL is available for use in pint, quart, gallon and 5 gallon kits. It can also be obtained in syringe and gun applicators.

A unique two component, room temperature curing, high temperature resistant epoxy adhesive called EP35 has been introduced by Master Bond Inc., Hackensack, N.J. This system produces high strength bonds whose strength is maintained even after long exposures to temperatures in the 450°F-500°F range. It has a 100 to 70 mix ratio by weight and can be applied without sagging or dripping even on vertical surfaces.

Master Bond EP35 produces durable and tough bonds which are remarkably resistant to thermal cycling and chemicals including water, oil and most organic solvents. It has a service operating temperature range of -60°F to 450-500°F. Adhesion to metals, glass, ceramics, wood, vulcanized rubbers and many plastics is excellent.

EP35 is 100% reactive and does not contain any diluents or solvents. Only contact pressure is required during cure. It is available in pint, quart, gallon and 5 gallon pail container kits.

A new room temperature curing, aluminum filled two component epoxy adhesive called EP22 has been introduced by Master Bond Inc. Hackensack N.J. This system has an easy to use one to one mix ratio by weight or volume. It produces durable high strength and tough bonds with outstanding adhesion to metals, particularly steel and aluminum. Bonds are remarkably resistant to thermal cycling and chemicals including water, oil and most organic solvents.

Master Bond EP22 is readily and easily machinable. It has good void filling properties. It can be employed over the wide service operating temperature range of -60°F to more than 250°F. Shrinkage upon cure is low and dimensional stability is high.

EP22 is gray color. Cures of EP22 can be accelerated by use of heat. It is available for use in pint, quart, gallon and 5 gallon container kits.