Adhesive, Sealant and Coating Systems for the Oil and Chemical Processing Industry
Master Bond has been at the forefront of developing technologically advanced polymer systems to meet the stringent demands of oil and chemical processing companies. Our specially formulated compounds offer unmatched resistance to corrosive environments and are serviceable at high temperatures.
Features of Master Bond’s Adhesives, Sealants and Coatings for the Oil and Chemical Processing Industry
Our formulations offer outstanding long-term resistance to gasoline, kerosene, alcohols, crude oils and natural gases. Specific grades of our epoxies feature:
- High temperature resistance
- Underwater curing capabilities
- High dimensional stability
- Superior abrasion resistance
- Exceptional adhesion to steel, aluminum alloys, copper and other metals
Applications of Master Bond Adhesives Within the Oil and Chemical Processing Industry
Our products are specifically designed to withstand exposure to adverse environmental conditions and are presently employed in:
- Downhole sensors
- Extraction equipment
- Drilling equipment
- Gaskets
- Pumps
- Valves
Master Bond’s adhesives, sealants and coatings are also used for the repair and maintenance of equipment, including transformers, reservoirs, tanks and processing equipment.
Most Popular Epoxy Compounds for the Oil and Chemical Processing Industry
- Supreme 45HTQ
- Two part, heat cured (250-300°F) epoxy system with excellent dimensional stability and chemical resistance. Serviceable from -60 to 450°F. Toughened, quartz filled system.
- EP21TP-2
- Two component polysulfide/epoxy adhesive/sealant. Cures at room temperature. Non-sagging, non-drip system. Exceptional toughness and chemical resistance properties.
- EP42HT-2
- Two part, room temperature curable epoxy system for bonding, coating, sealing and potting. Low viscosity for ease of application. Highly chemical and temperature resistant.
- Supreme 10AOHT
- One part, oven cured epoxy system with excellent thermal conductivity and superb temperature and oil resistance. Primarily used for bonding of heat sinks and sensors where heat transfer is desirable. Halogen free.
- Supreme 10HT/S
- One part, electrically conductive, heat cured epoxy system with very low resistance along with high temperature and chemical resistance, particularly to oils.
- EP62-1
- Two part, water and steam resistant epoxy cures at 80-100°C and withstands autoclaving. Excellent chemical and electrical insulation properties. Features a long working life.
- EP41S-1
- Easily processable, two part epoxy with excellent chemical resistance, particularly to solvents. Available in black.
